NOVA 5300 SERIES NEXT GENERATION PORTABLE FLUE GAS ANALYZER

Alat Laboratorium Lingkungan

5300 SERIES NEXT GENERATION PORTABLE FLUE GAS ANALYZER

APPLICATIONS

For spot-check measurement of oxygen (O2), carbon monoxide (CO), carbon dioxide (CO2), oxides of nitrogen (NO & NO2) and sulfur dioxide (SO2) emissions. For checking combustion efficiency, and burner & control performance on furnaces, heaters and boilers. May be used in commercial, industrial and residential settings.

FEATURES
• Same rugged easy-to-use design as traditional Nova portable analyzers, but approx. 65% smaller and 50%        lighter
• Fast warm-up and accurate response
• Built-in sample pump & condensate removal
• Rechargeable lithium ion battery; up to 8hrs use per charge
• Rugged touch-screen display of gas readings
• Calculated values e.g. combustion efficiency, O2 normalization, excess air, unit conversion ppm to mg/m3 for    ppm gases measured
• Local USB data logging creates CSV files
• Built-in trouble-shooting prompts
• Electrochemical sensors for O2, CO, NO, NO2, and SO2
• CO2 actually measured by infrared detector - not calculated
• Rapid reading recovery on CO, NO, NO2, or SO2 'overdose'
• Use on flue gas from any fuel; pays for itself in months through fuel savings 

OPTIONS
• Stack temperature probe and readout
• Various sample probes; including high temperature
• Built-in printer

CALIBRATION
• Ambient air for O2 span and CO, CO2, NO, NO2, andSO2 zero
• On analyzed gas mixtures of CO and CO2 in nitrogen, NO & NO2 in nitrogen, and SO2 in nitrogen for span        (also zeroes O2)

DESCRIPTION
The Nova 5300 Series Portable Flue Gas analyzer is built on the NovaNOW next generation rugged portable platform. This series has been designed for accuracy, reliability, ease of use and ease of service, providing a detailed spot-check analysis of flue gas composition. The 5300 uses customer-replaceable electrochemical sensors that respond quickly to the O2, CO, NO, NO2, and SO2 present in the flue gas sample. The O2 sensor life expectancy is typically 3-4 years. The CO, NO, NO2, and SO2 sensor life is typically 2-3 years. The infrared CO2 sensor should not need to be replaced under normal conditions of use. A rechargeable lithium ion battery provides enough power for about 8 hours of continuous operation and the analyzer can be used while it is being recharged. The 5300 series case is small but rugged and dust & water resistant when closed. Stack temperature measurement and built-in printer that also shows date & time are optionally available on any model.

MODELS
• 5301-A: O2 only
• 5301-B: CO only
• 5301-C: CO2 only
• 5301-D: NO only
• 5302-A: O2 & CO
• 5303-A: O2, CO, & NO
• 5303-B: O2, CO2, & CO
• 5304-A: O2, CO2, CO, & NO
• 5304-B: O2, CO, NO, & SO2
• 5305-A: O2, CO2, CO, NO, & SO2
• 5306-A: O2, CO2, CO, NO, NO2, & SO2
• Stack temperature, NO, NO2, SO2, CO2, may be separately added to any model

SPECIFICATIONS

Description
Gases Measured:  Customer replaceable electrochemical O2, CO, SO2, NO, & NO2 sensors Solid state infrared                                 detector for CO2
Ranges Available:
0-25.0% O2
0-20.0%CO2
0-200 up to 0-9999 PPMCO
0-200 up to 0-5000 PPM NO
0-200 up to 0-800 PPM NO2
0-200 up to 0-2000 PPM SO2
32-1800°F (0-1000 °C) net stack temperature

Resolution: 0.1% on percent ranges; 1 PPM on PPM ranges; 1°F (1°C) stack temperature
Accuracy: ±1-2% of full scale
Drift: < 2% full scale per 8 hours of continuous operation
Response Time (T-90): < 30 seconds for 90% of O2, CO, CO2 and SO2, < 60 seconds for 90% NO and NO2
Ambient Temperature Ranges: 32° to 122°F (0 to 50°C)
Linearity: ±1% of full scale for each gas measured
Size and Weight: approx. 26 x 18 x 13 cm @ 3.4 kg (10" x 7" x 5" @ 7.5lbs)
Power: 12V battery operation. 115VAC 60Hz for recharging (220VAC 50Hz available)
Output options: CSV log files written to USB memory stick.