TFAQ810 STAPLEX QUARTZ FILTERS FOR PM10 & PM2.5

Alat Laboratorium Lingkungan

Filter Papers

Quartz Filters for Staplex PM10 & PM2.5

TYPE FILTERS : TFAQ810 8" x 10" Quartz Filters QTY : 1 BOX ( 25 per Box )

FLOW RATE, (approx). : 60-68 cfm
1.7-2 cmm

CHARACTERISTICS :
Recommended for PM10 and PM2.5 High Volume Air Sampling

GLASS FIBER FILTER DATA

Glass Fiber Filters are especially recommended wherever gravimetric weighing analysis may be required because of their non-hygroscopic properties, i.e. they will maintain constant weight under wide-ranging conditions of ambient humidity. Their excellent loading characteristics make them ideal for routine air monitoring and for specialized monitoring of solid pollutants, microrganisms, oil and acid smokes etc. They are particularly recommended where higher efficiency collection of fine particles is required. They exhibit higher particle capacity then cellulose filters. Their fine optical characteristics make them ideal for sensitive and accurate measurement of collected smoke par­ticle. Used especially for on-the-spot visual examination and instrumentation. Glass Fiber Filters have a higher den­sity then paper filters and can tolerate a far wide useful temperature range.

Composition of the Glass Fiber Filter is of such a nature that the finely woven texture of microfilaments of glass creates the highest sampling efficiency. The efficiency of the Glass Fiber Filters at the relative flow rate for particles as small as .3 micron is 99.98%.

Staplex Glass Fiber Filters are binderless (i.e. they do not contain organic binders). The heat resistance is up to approximately 470-490 degrees C.